Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.
Style KXT P307 Aramid Fiber Packing
Aramid Fiber Packing is braided from high quality Dupont Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely hardwearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in.
Advantages:
• Superior lubrication leads to less wear and higher shaft speed capability
• Very dense packing for high pressure and high speed applications
• Excellent replacement for PTFE-impreganted asbestos packing
• Extremely durable and abrasion resistant packing
• Well suited for difficult sealing applications
• Used in connection with most chemicals
• Impregnated with PTFE dispersion
Application:
• Rotary pumps and valves stems
• Diluted acids and lyes
• Paints and varnishese
• Pump and paper mills
• Mines and quarries
• Abrasive media
• Refineries
• lubricants
• Solvents
• Water
• Oil., etc
Main Features:
|
Pressure |
Rotary pump |
80 bar |
|
Reciprocating pump |
200 bar |
|
|
Static Sealing |
300 bar |
|
|
Rotary speed |
20 m/s |
|
|
Density |
1.4g/cm3 |
|
|
Temperature |
-100~+280°C |
|
|
PH Value |
0~14 |
|
